Australia’s construction sector is short of skilled tradespeople, and several trades are firmly on the list of occupations that can be sponsored for a visa. Carpenters and welders typically earn in the AUD $65,000 to $110,000 range used in this guide, while electricians and plumbers often earn more, commonly cited between $70,000 and $120,000. The main sponsorship route is the Skills in Demand visa (subclass 482), Core Skills stream, which can lead toward permanent residency through the subclass 186 visa.
Getting sponsored is not automatic. Most trades need a positive skills assessment from Trades Recognition Australia (TRA) before a visa application can proceed, and electricians and plumbers usually need to go through TRA’s Offshore Skills Assessment Program. State licensing is a separate requirement on top of the visa. This guide explains salaries, eligible trades, the skills assessment and sponsorship process, and how to apply. Figures are estimates from public salary and migration guides, which sometimes disagree, so treat every number as indicative rather than guaranteed. No job, sponsorship, skills assessment or visa outcome is promised by this article.
Which Construction Trades Are Eligible for Sponsorship
Trade eligibility for the 482 visa runs through the Core Skills Occupation List (CSOL), introduced in December 2024 for the Core Skills stream of the Skills in Demand visa and the Direct Entry stream of the subclass 186 visa. According to the official Core Skills Occupation List and migration agent summaries of it, construction trades commonly cited as included are:
- Bricklayer (ANZSCO 331111)
- Carpenter and Joiner, Carpenter, Joiner (331211, 331212, 331213)
- Floor Finisher (332111)
- Painter and Decorator (332211)
- Glazier (333111)
- Plasterer, Renderer (333211, 333212)
- Roof Tiler (333311)
- Wall and Floor Tiler (333411)
- Various plumbing trades, including Plumber (General) (334116), Gasfitter, Drainer, Roof Plumber and Fire Protection Plumber
- Electrician (General) and Electrician (Special Class) (341111, 341112)
- Air Conditioning and Refrigeration Mechanic (342111)
Occupation lists and legislative instruments change, so confirm your exact ANZSCO code and its current status directly through the Department of Home Affairs before relying on any third-party summary, including this one.
Skills in Demand Visa (Subclass 482): How Sponsorship Works
The Core Skills Stream
For most trades, the relevant pathway is the Core Skills stream of the subclass 482 visa. Your employer must be an approved sponsor, your occupation must be on the CSOL, and the salary offered must meet or exceed the applicable income threshold or the Annual Market Salary Rate (AMSR) for the role and location, whichever is higher.
The Income Threshold: Conflicting Figures to Check Carefully
Sources disagree on the exact 2026 threshold, and this is worth verifying directly before assuming any single figure. Some sources cite the Temporary Skilled Migration Income Threshold (TSMIT) at AUD $73,150 a year, others describe it as “indexed around $76,000,” and a Home Affairs-derived figure reported elsewhere puts the Core Skills Income Threshold at AUD $79,423 for nominations lodged between 1 July 2026 and 30 June 2027. These figures may reflect different points in the indexation cycle or different terminology. Whichever applies, an offered trade salary in the $65,000 to $75,000 range needs to be checked carefully against the current threshold before assuming it qualifies for sponsorship.
Skills Assessment: The Step Most Guides Underplay
Before a visa application can proceed, most construction trades need a positive skills assessment from Trades Recognition Australia (TRA), the body responsible for assessing most building and construction occupations. Electricians and plumbers are commonly required to go through TRA’s Offshore Skills Assessment Program (OSAP) to obtain an outcome, and other trades may have their own assessment pathway. This step, along with English language testing, generally has to be completed before your employer can proceed with nomination, so it should be treated as the first real hurdle, not paperwork to sort out later.
Labour Market Testing
Employers are generally required to carry out labour market testing, meaning they must advertise the role and show a genuine attempt to fill it locally, before sponsoring from overseas. This is a legislative requirement for most Core Skills stream nominations, so a genuine sponsor should be able to demonstrate this step if asked.
State Licensing
A visa alone does not let you legally practise most regulated trades in Australia. Electricians and plumbers in particular need a state or territory licence, which typically requires proof of qualifications, and in many cases supervised local experience, before you can work unsupervised. One migration guide notes that newly arrived electricians and plumbers commonly need around 12 months of supervised work before working independently, so factor this into your income and timeline expectations.
Construction Trade Salaries and Requirements at a Glance
| Trade | ANZSCO code | Typical salary range (AUD) | Demand level | Visa pathways commonly cited | Skills assessment |
|---|---|---|---|---|---|
| Electrician (General) | 341111 | $70,000–$120,000 | Very high | 482, 186, 189, 190, 491, 494 | TRA, via OSAP for offshore applicants |
| Plumber (General) | 334116 | $70,000–$120,000 | Very high | 482, 186, 189, 190, 491, 494 | TRA, via OSAP for offshore applicants |
| Carpenter | 331212 | $65,000–$110,000 | High | 482, 186, 189, 190, 491, 494 | TRA |
| Welder | 322313 | $65,000–$110,000 | High | 482, 186, 189, 190, 491, 494 | TRA |
| Bricklayer | 331111 | Not separately reported; likely comparable to carpenter range | Reported as in demand | 482, 186 | TRA |
| Air Conditioning and Refrigeration Mechanic | 342111 | Not separately reported | Reported as in demand | 482, 186 | TRA |
Sources: Migration Republic’s construction migration guide for salary ranges and demand levels; the Core Skills Occupation List for eligible trades; and TRA’s published role as skills assessing authority. Not every trade on the CSOL had a separately reported salary range in the sources checked, and those cells are marked accordingly rather than estimated.
Requirements for Applicants
- Trade qualification or verified experience. Whether through a completed apprenticeship, trade certificate, or documented years of hands-on experience, your qualifications need to survive scrutiny from TRA.
- Clean, well-documented work history. One migration guide specifically warns that cash-in-hand work without records is a common reason for rejected assessments, and that employer references need to describe specific tasks that map to the ANZSCO occupation definition, not vague job titles.
- English language ability. Required for the visa application itself and for safety-critical communication on site.
- A genuine job offer from an approved sponsor. The employer must hold, or successfully apply for, standard business sponsor status.
- Willingness to work under supervision initially. Particularly for electricians and plumbers, who may not be able to work independently until they gain the relevant state licence.
Which Employers to Research
Direct sponsorship terms differ by company, project pipeline and location, so the names below are a starting point for research, not confirmation that any of them is currently sponsoring, hiring, or will sponsor you. Australia’s major contractors and builders, including large national firms working on infrastructure, high-rise residential and commercial projects, are the most likely sources of sponsored trade roles, since they run large enough projects to justify the cost and administrative effort of sponsorship. Regional and state-based builders, particularly in areas facing acute shortages, may also be worth approaching, and some regional roles can align with additional visa pathways such as the subclass 494 (regional) visa. Always verify a company’s sponsor status directly, check their careers page for genuine current vacancies, and be cautious of any recruiter or agency claiming to represent an employer without being able to name it.
Visa Pathways Beyond the 482
Several sources note that construction trades commonly appear across multiple visa options, not only the 482:
- Subclass 186 (Employer Nomination Scheme): Available through the Direct Entry stream for CSOL occupations, or after two years on a 482 through the Temporary Residence Transition stream.
- Subclass 189, 190 and 491: Points-tested and state or regionally nominated visas that use the separate Medium and Long-Term Strategic Skills List (MLTSSL), which uses the older 2013 ANZSCO classification rather than the CSOL. Whether your trade is eligible under these routes needs to be checked against the MLTSSL specifically, since it is a different list from the one used for 482 sponsorship.
- Subclass 494 (Skilled Employer Sponsored Regional): A regional employer-sponsored option that can offer additional pathways for trades willing to work outside major metropolitan areas.
- Designated Area Migration Agreements (DAMAs): Regional agreements that can offer more flexible terms, including for applicants over the standard age cut-offs used in mainstream skilled visas.
Each of these routes has its own eligibility rules, age limits and processing considerations, so treat this as a map of options to investigate with a registered migration agent rather than a guarantee that any one of them applies to you.
How to Apply: Step-by-Step
- Confirm your ANZSCO code and CSOL status. Match your actual trade duties to the correct code and verify it currently appears on the Core Skills Occupation List.
- Start your TRA skills assessment early. For electricians and plumbers, this generally means the Offshore Skills Assessment Program. Gather qualification certificates and detailed, verifiable employer references before applying.
- Meet English language requirements. Check the specific test and score needed for your visa stream.
- Find an approved sponsor. Target larger contractors and builders, and confirm their sponsor status and the salary they are offering against the current income threshold.
- Confirm labour market testing has occurred. Ask your prospective employer whether they have completed this step, since it is generally required before nomination.
- Apply for state licensing in parallel. Especially for electricians and plumbers, start researching state licensing requirements before you arrive, since a visa alone does not authorise unsupervised trade work.
- Lodge the visa application. Once your sponsor has approved nomination, apply for the subclass 482 visa with your skills assessment, English results and supporting documents.
- Plan for supervised work initially. Budget financially and logistically for a possible supervised period before working independently in a licensed trade.
Compliance and Scam Warnings
- You should not pay for sponsorship itself. Employers bear the nomination costs; be wary of anyone charging you directly for “guaranteed” sponsorship.
- Verify any employer or recruiter independently. Search for the company, check for a genuine careers page, and be cautious of unsolicited offers that arrive without you having applied.
- A skills assessment does not guarantee a visa, and a visa does not guarantee a state licence. Treat each stage as a separate hurdle.
- Occupation lists change. A trade’s CSOL status or income threshold can be updated, so re-verify before lodging any application, even if you researched the rules months earlier.
- Age limits apply to some visa pathways. If you are over the standard cut-off for mainstream skilled visas, ask specifically about DAMA options rather than assuming you are ineligible for every route.
Frequently Asked Questions
How much do sponsored construction workers earn in Australia? Public sources commonly cite AUD $65,000 to $110,000 for carpenters and welders, and AUD $70,000 to $120,000 for electricians and plumbers. These are estimates, not guaranteed salaries, and actual pay depends on the employer, state and project.
Which construction trades can be sponsored for a visa in Australia? Trades commonly cited on the Core Skills Occupation List include bricklayers, carpenters and joiners, painters, glaziers, various plumbing trades, electricians and refrigeration mechanics, among others. Confirm your specific ANZSCO code’s current status with the Department of Home Affairs.
Do I need a skills assessment before applying? Generally yes. Most construction trades require a positive assessment from Trades Recognition Australia, and electricians and plumbers usually go through TRA’s Offshore Skills Assessment Program.
Is a visa enough to start working as an electrician or plumber? No. You also need a state or territory licence, and newly arrived tradespeople in these occupations commonly need a period of supervised work, often cited as around 12 months, before working independently.
What is the minimum salary for sponsorship? Sources report different figures for the relevant income threshold, ranging from about $73,150 to $79,423 depending on the source and time period. Confirm the exact current threshold with Home Affairs or a registered migration agent before assuming a job offer qualifies.
Can I get permanent residency as a sponsored construction worker? Potentially, through the subclass 186 visa, either via Direct Entry if your occupation is on the CSOL or after two years on a 482 visa through the Temporary Residence Transition stream. This is not guaranteed and depends on meeting all requirements at the time of application.
Are there options if I’m older than typical visa age limits? Designated Area Migration Agreements (DAMAs) are sometimes cited as more flexible on age for applicants who do not fit standard skilled visa cut-offs. Discuss your specific situation with a registered migration agent.
Final Thoughts
Australia’s construction sector offers real, well-paid sponsorship opportunities for tradespeople, with carpenters and welders commonly cited in the $65,000 to $110,000 range and electricians and plumbers often higher. The path runs through the 482 visa’s Core Skills stream, but a positive TRA skills assessment and, eventually, a state licence are just as important as the visa itself.
The most useful first step is to confirm your ANZSCO code, begin the TRA skills assessment process early, and target larger contractors and builders who are established sponsors. This article is general information, not immigration advice, and it does not guarantee any job, skills assessment, sponsorship, visa or income. For guidance specific to your situation, consult a registered migration agent.